Inspired by nature. Powered by technology 

 

TESY AquaThermica Pro is a floor standing air-to-water heat pump for domestic hot water engineered for high energy efficiency, smart performance, and eco-conscious operation. Designed for domestic hot water production, it is available in 200L and 260L capacities

Using the natural R290 (propane) refrigerant, AquaThermica Pro achieves ultra-low Global Warming Potential (GWP) and zero Ozone Depletion Potential (ODP). It can heat water up to 65°C using only the heat pump, offering up to 75% energy savings versus conventional electric water heaters. Its high Coefficient of Performance (COP)—up to 3.8—makes it one of the most efficient systems in its class.

  • Floor-standing "air-water" heat pump for domestic hot water production.
  • The AquaThermica Pro range includes models with a volume of 200 and 260 liters  without a heat exchanger
  • Greater energy efficiency and performance = > ecofriendly refrigerant R290 /propane/
  • Electric heater for faster heating and reaching a high temperature of 75°C
  • Automatic "Antilegionella" function and self-diagnosis system
  • Energy class A+
  • Reduced CO2 emissions
  • Temperature range of the incoming air from -7°С to +43°С
  • Up to 75% reduced electricity consumption
  • Lateral 45° air ducts for installation in rooms as low as 2 meters
  • Quiet operation: just 34 dB(A) at 1 meter
  • DRY CHECK Check the magnesuim anode without draining the water.
  • Electronic Expansion Valve (EEV) for precision refrigerant control
  • Microchannel condenser and dual temperature sensors for performance and efficiency
  • Connection to solar and photovoltaic panels
  • Easy-to-use electronic panel
TIN Code 306179
Capacity 260 L
Range 260
Height 1911 m
Energy class A+
Maximum
operational temperature
75 °C
Maximum working pressure 8 bar
Diameter 630 mm
Declared load profile XL
Electric heating element power 1.5 kW
Min. ÷ max temperature heat pump air intake (90% R.H.) -7 ÷ 43 °C
Frequency 50 Hz
Annual electricity consumption in kWh under average climate conditions 1152 kWh
Power supply 1/N/220-240 V
Compressor Rotary
Min. ÷ max temperature installation site -4 ÷ 40 °C
Compressor protection Thermal circuit breaker with automatic reset
Maximum current in HP 2.5 + 6.5 (e-heater) = 9 A
Required overload protections 16A T fuse/ 16 A automatic switch characteristic C (to be expected during installation on power supply systems)
Fan Centrifugal
HP Maximum settable temperature 65 °C
Internal protection Single safety thermostat with manual reset on a resistive element
Nominal air capacity 360 m³/h
Motor protection Internal thermal circuit breaker with automatic reset
Condenser Wrapped externally not in contact with water
Transport weight 112,8 kg
Automatic anti-Legionnella disinfection cycle YES
Minimum height of the premise 2000 mm
Defrosting Active 4-way valve
CoP (DHW) 3.8
Degree of Protection IPX4
Refrigerant R290
Refrigerant charge 150
Average heat pump consumption [Condition EN16147:2017 A7/W55] 0.400 kW