Inspired by nature. Powered by technology 

AquaThermica Pro with a heat exchanger is a floor-standing air-to-water heat pump for domestic hot water, operating on eco-friendly propane (R290 refrigerant), and compatible with external energy sources such as boilers or solar systems

  • Floor-standing "air-water" heat pump for domestic hot water production.
  • Greater energy efficiency and performance are guaranteed by environmentally friendly refrigerant R 290 / propane/ 
  • Electric heting element for faster heating and reaching a high temperature of 75°C.
  • Automatic "Antilegionella" function and self-diagnosis system
  • Floor standing models
  • Energy class A+
  • Reduced CO2 emissions
  • Water tank capacity from 200 to 260 L
  • Up to 75% reduced electricity consumption
  • Lateral 45° air ducts for installation in rooms as low as 2 meters
  • Quiet operation: just 34 dB(A) at 1 meter
  • DRY CHECK Check the magnesuim anode without draining the water.
  • Electronic Expansion Valve (EEV) for precision refrigerant control
  • Microchannel condenser and dual temperature sensors for performance and efficiency
  • Up to 65°C DHW temperature with operation of only the heat pump unit
  • Connection to solar and photovoltaic panels, compatible also with external energy sources such as boilers or solar systems
  • User friendly electronic panel
TIN Code 306267
Capacity 251 L
Range 251
Height 1911 m
Energy class A+
Maximum
operational temperature 		75 °C
Maximum working pressure 8 bar
Diameter 630 mm
Heating time 9:37 h:min
Declared load profile XL
Electric heating element power 1.5 kW
HP maximum absorption 0.47 + 1.5 (e-heater) = 1.970 kW
Min. ÷ max temperature heat pump air intake (90% R.H.) -7 ÷ 43 °C
Frequency 50 Hz
Annual electricity consumption in kWh under average climate conditions 1160 kWh
Power supply 1/N/220-240 V
Compressor Rotary
Min. ÷ max temperature installation site -4 ÷ 40 °C
Compressor protection Thermal circuit breaker with automatic reset
Maximum current in HP 2.5 + 6.5 (e-heater) = 9 A
Required overload protections 16A T fuse/ 16 A automatic switch characteristic C (to be expected during installation on power supply systems)
Fan Centrifugal
HP Maximum settable temperature 65 °C
Internal protection Single safety thermostat with manual reset on a resistive element
Nominal air capacity 360 m³/h
Motor protection Internal thermal circuit breaker with automatic reset
Condenser Wrapped externally not in contact with water
Transport weight 127.3 kg
Automatic anti-Legionnella disinfection cycle YES
Minimum height of the premise 2000 mm
Cathodic protection Mg anode Ø 33 x 400 mm
Defrosting Active with 4-way valve
CoP (DHW) 3.8
Degree of Protection IPX4
Refrigerant R290
Refrigerant charge 150

Compare

Delete all